JACKON INSULATION

For more than 35 years, JACKON Insulation has been successfully manufacturing high-quality materials made of extruded polystyrene foam (XPS). As an innovative company committed to continuous product improvements, JACKON Insulation has built a reputation as a strong and reliable supplier in a fiercely competitive market. With products such as JACKODUR® XPS boards, JACKON ranks among the most ground-breaking companies in the industry.

The JACKON Insulation name is synonymous with high-quality and sustainable products. This has been achieved over time by giving close attention to the careful selection of raw materials and suppliers to ensure the development of energy-efficient solutions.

JACKODUR® for industrial applications is a business unit tailored specifically to the needs of the processing industry. JACKON Insulation develops customised solutions for its customers, designing composite elements for use in the building industry and vehicle manufacturing sectors.

JACKODUR® for industrial applications is manufactured at JACKON Insulation’s German facility in Mechau, employing a production process monitored by consistent quality controls.

JACKODUR CFR

JACKODUR CFR

LEARN MORE
JACKODUR PLUS

JACKODUR PLUS

LEARN MORE

JACKODUR® CFR

JACKODUR® CFR products are highly durable, dimensionally stable, water-repellent, thermally insulating and lightweight. These qualities make them the ideal product for a variety of applications. The JACKODUR® CFR product line is available in a number of variants, including strength and finish, depending on the application and specified requirements.

PRODUCT TYPES:

  • JACKODUR® CFR 300
  • JACKODUR® CFR 400
  • JACKODUR® CFR 500
  • JACKODUR® CFR 700

KEY FEATURES:

  • Custom sizes available in small batches
  • Choice of compressive strength variants
  • Various surface finishes
  • Dimensionally stable
  • Moisture-resistant
  • Superior mechanical properties
  • Thickness tolerance +/- 0.15mm
  • Easy to work with
  • Lightweight
  • 100% recyclable
  • Low thermal conductivity 0.034 @ 90 days

PRODUCT SPECIFICATIONS:

  • Thicknesses from 8 mm to 160 mm produced inline, with a planed surface
  • Small batches from 10 m3 available in custom sizes
  • Compressive strengths ranging from 300 to 700 kPa, with a bulk density of 30 – 50kg /m3
  • Thicknesses from 2.8 mm to 160 mm, board lengths from 1000 mm to 3050 mm, and widths from 460 mm to 1220 mm

BROCHURE DOWNLOAD:

Further details and specifications for this product, download the product brochure:

JACKODUR® CFR PRODUCT BROCHURE

FINISH OPTIONS:

JACKODUR® FT

JACKODUR® FT boards are manufactured using a precise, planing process. Following the manufacturing process, the board surface is milled in order to create a flat surface, which is a high priority when laminating composite sandwich panels. The thickness tolerance of JACKODUR® FT is +/- 0.15 mm.

JACKODUR® FTR

JACKODUR® FTR boards are manufactured using a precise, planing and grooving process. Following the manufacturing process, the board surface is planed and grooved. The grooves are spaced 40 mm apart on both sides of the board and have an optimised depth and breadth of 2 mm. The planing process creates a flat surface, while the grooves allow adhesive to be spread evenly and prevent entrapped air from forming during production of composite sandwich panels. Groove depths can be customised on request. The thickness tolerance of FTR is +/- 0.15 mm.

JACKODUR® FTD

JACKODUR® FTD is particularly suited for thin core or carrier layers for use in sandwich elements and panels. Customised boards as thin as 2.8 mm can be hot wire cut from blocks.

JACKODUR® PLUS

JACKODUR PLUS combines the properties of JACKODUR CFR with significantly reduced thermal conductivity. The thermal insulation of JACKODUR PLUS is improved by up to 27% in comparison to JACKODUR CFR products. JACKODUR PLUS allows a thinner board to be used, resulting in an increase of available space. In addition, the blowing agent used in JACKODUR PLUS has an extremely low GWP (Global Warming Potential), and therefore effectively contributes to climate and environmental protection.

PRODUCT TYPES:

  • JACKODUR PLUS 300
  • JACKODUR PLUS 400
  • JACKODUR PLUS 500

KEY FEATURES:

  • Custom sizes available in small batches
  • Choice of compressive strength variants
  • Various surface finishes
  • Dimensionally stable
  • Moisture resistant
  • Superior mechanical properties
  • Thickness tolerance +/- 0.15mm
  • Easy to work with
  • Lightweight
  • 100% recyclable
  • Low thermal conductivity 0.027 @ 90 days

PRODUCT SPECIFICATIONS:

  • Thicknesses from 20 mm to 160 mm produced inline, with a planed surface
  • Small batches from 10 m3 available in custom sizes
  • Compressive strengths ranging from 300 kPa to 500 kPa, with a bulk density of 32 kg to 45 kg /m3
  • Thicknesses from 2.8 mm to 160 mm, board lengths from 1000 mm to 3050 mm, and widths from 450 mm to 1500 mm

BROCHURE DOWNLOAD:

Further details and specifications for this product, download the product brochure:

JACKODUR® PLUS PRODUCT BROCHURE

FINISH OPTIONS:

JACKODUR® FT

JACKODUR® FT boards are manufactured using a precise, planing process. Following the manufacturing process, the board surface is milled in order to create a flat surface, which is a high priority when laminating composite sandwich panels. The thickness tolerance of JACKODUR® FT is +/- 0.15 mm.

JACKODUR® FTR

JACKODUR® FTR boards are manufactured using a precise, planing and grooving process. Following the manufacturing process, the board surface is planed and grooved. The grooves are spaced 40 mm apart on both sides of the board and have an optimised depth and breadth of 2 mm. The planing process creates a flat surface, while the grooves allow adhesive to be spread evenly and prevent entrapped air from forming during production of composite sandwich panels. Groove depths can be customised on request. The thickness tolerance of FTR is +/- 0.15 mm.

JACKODUR® FTD

JACKODUR® FTD is particularly suited for thin core or carrier layers for use in sandwich elements and panels. Customised boards as thin as 2.8 mm can be hot wire cut from blocks.

WE’RE HERE TO HELP

Contact us for a quote, product sample or optimisation consultation.

PROJECT OPTIMISATION
CONTACT